Note: A mainstream brand SD card is recommended, some minor brand cards will not be recognized during boot up but will operate normally otherwise. Obtain an SD memory card, for requirements see SD card guidelines.Old versions will not work correctly with new SOM boards. Note: As of April 19, 2011, this process uses a revised download file. A full set of TME based adjustments will be required. Warning: When this process is used, all existing files on the SOM board will be removed. All file stored on the SOM board will be lost, including calibration files, license files, and configuration files. This process will erase the flash memory on the SOM board then install new firmware. The appropriate set of boot files can be obtained by contacting factory customer support for FieldFox.

The boot from this SD card makes no assumptions about the contents of the flash memory on the SOM board. When the flash memory on the FieldFox SOM board has become corrupted or if the SOM board is new, it is necessary to boot the FieldFox from a specially prepared SD card. Describe the symptoms that make this procedure necessary. If you require permission, please contact factory customer support for FieldFox. The information on this web page should only be used when a new SOM board has been installed or with permission from factory customer support for FieldFox.

How to clone sd card serial number